J.B. WELD STIK WELD
SteelStik, 2 OZ, Reinforced Epoxy Putty Adhesive/Sealant Stick, Plugs Holes & Makes Permanent Repairs On Wet & Dry Surfaces, Simply Knead Thoroughly With Your Fingers & Apply, Will Cure Completely In 2 To 30 Minutes Even If Submerged In Water Or Gasoline, It Can Be Drilled, Sanded, Filed, Tapped, Machined & Painted.
View Details
|
228012 |
J.B. WELD STIK WELD |
In Stock |
7.99 |
/ EA |
8267-C |
|
J.B. WELD KWICK WELD ADHESIVE
2 OZ J-B KwickWeld Tube, Fast Set Cure Version, Sets In 4 Minutes & Fully Cure In 4-6 Hours, Waterproof, Petroleum, Chemical & Acid Resistant Once Fully Cured, Non-Toxic, Temperature Resistant Up To 300 Degrees, Can Be Used On Almost Any Surface, Bronze, Porcelain, Ceramic, Marble, Glass, Wood, Concrete, Fiberglass, Steel, Iron, Copper, Aluminum, ABS & PVC Plastics, When Fully Cured Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted.
View Details
|
268915 |
J.B. WELD KWICK WELD ADHESIVE |
In Stock |
7.99 |
/ EA |
8276 |
|
10OZ COLD WELD ADHESIVE
Cold Weld, 2 OZ, Original Adhesive Compound , It Works On Just About Any Surface Including Iron, Steel, Copper, Aluminum, Brass, Bronze, Pewter, Porcelain, Ceramic, Marble, Glass, Concrete, Fiberglass, Wood & Most Plastics, Just Squeeze Equal Parts From The 2 Separate 1 OZ Tubes Onto A Mixing Surface & Mix Thoroughly With A Putty Knife Or Similar Tool, Cures In 24 Hours & When Cured It Will Withstand Temperatures Of 600 Degrees, Waterproof, Petroleum, Chemical & Acid Resistant, Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted, With A Tensile Strength Of 3960 PSI, Perfect Solution For Any Heavy Duty Adhesive Job, Tube.
View Details
|
552836 |
10OZ COLD WELD ADHESIVE |
In Stock |
7.99 |
/ EA |
8265-S |
|
J.B. WATERWELD
Water Weld Auto, 2 OZ, Epoxy Putty, Plugs Holes & Make Permanent Repairs In Moist Surface Or Under Water Applications, Waterweld Will Even Repair Leaking Fuel Tanks, Pull Off The Amount Needed For Job & Knead With Fingers Until Thoroughly Mixed, Then Push Product Into Hole, Cures In 20 To 30 Minutes & Can Be Drilled, Sanded, Filed, Tapped, Machined & Painted, Non-Toxic & Approved For Use With Potable Water, Use On Auto, Ceramic, Epoxy Putty Sticks, Fiberglass, Metal, Plastic/Composite/PVC & More.
View Details
|
611903 |
J.B. WATERWELD |
In Stock |
7.99 |
/ EA |
8277 |
|
