75 SERIES L-JAW COUPLER 1/2"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17396 |
75 SERIES L-JAW COUPLER 1/2"BORE |
In Stock |
9.99 |
/ EA |
C-L075-A |
|
75 SERIES L-JAW COUPLER 3/4"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17400 |
75 SERIES L-JAW COUPLER 3/4"BORE |
In Stock |
9.99 |
/ EA |
C-L075-C |
|
75 SERIES L-JAW COUPLER 7/8"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17404 |
75 SERIES L-JAW COUPLER 7/8"BORE |
In Stock |
9.99 |
/ EA |
C-L075-D |
|
75 SERIES L-JAW COUPLER INSERT
Lovejoy offers multiple types of elastomer designs to allow for additional flexibility in addressing specific application requirements. Each of the types provide different performance capabilities for the coupling, including torque rating, RPM speed, dampening capacity, chemical resistance, and operating temperature ranges. Within the different elastomer types are two different designs, solid center spiders and open-center type spiders. The solid center design is the commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gap. The open-center design allows for the shafts of the driver and driven to be positioned within a short distance. Open-center elastomers offer shaft positioning flexibility but offer lower RPM capacity.
View Details
|
17412 |
75 SERIES L-JAW COUPLER INSERT |
In Stock |
5.99 |
/ EA |
C-L075NBR |
|
95SERIES L-JAW COUPLER 1/2"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17420 |
95SERIES L-JAW COUPLER 1/2"BORE |
In Stock |
13.99 |
/ EA |
C-L095-A |
|
95SERIES L-JAW COUPLER 5/8"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17424 |
95SERIES L-JAW COUPLER 5/8"BORE |
In Stock |
13.99 |
/ EA |
C-L095-B |
|
95SERIES L-JAW COUPLER 3/4"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17428 |
95SERIES L-JAW COUPLER 3/4"BORE |
In Stock |
13.99 |
/ EA |
C-L095-C |
|
95SERIES L-JAW COUPLER 7/8"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17432 |
95SERIES L-JAW COUPLER 7/8"BORE |
In Stock |
13.99 |
/ EA |
C-L095-D |
|
95SERIES L-JAW COUPLER 1"BORE
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17436 |
95SERIES L-JAW COUPLER 1"BORE |
In Stock |
13.99 |
/ EA |
C-L095-F |
|
95SERIES L-JAW COUPLER INSERT
Lovejoy offers multiple types of elastomer designs to allow for additional flexibility in addressing specific application requirements. Each of the types provide different performance capabilities for the coupling, including torque rating, RPM speed, dampening capacity, chemical resistance, and operating temperature ranges. Within the different elastomer types are two different designs, solid center spiders and open-center type spiders. The solid center design is the commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gap. The open-center design allows for the shafts of the driver and driven to be positioned within a short distance. Open-center elastomers offer shaft positioning flexibility but offer lower RPM capacity.
View Details
|
17444 |
95SERIES L-JAW COUPLER INSERT |
In Stock |
7.99 |
/ EA |
C-L095NBR |
|
100SERIES L-JAW COUPLER 1-1/4BOR
Jaw couplings require no lubrication because there is no metal to metal contact. They provide excellent resistance to oil, dirt, sand, moisture and grease. Jaw couplings are fail-safe, which means that they will continue to perform even if the elastomer fails. This protects both driving and driven equipment from catastrophic damage.
View Details
|
17464 |
100SERIES L-JAW COUPLER 1-1/4BOR |
In Stock |
23.99 |
/ EA |
L100-I |
|
100SERIES L-JAW COUPLER INSERT
Lovejoy offers multiple types of elastomer designs to allow for additional flexibility in addressing specific application requirements. Each of the types provide different performance capabilities for the coupling, including torque rating, RPM speed, dampening capacity, chemical resistance, and operating temperature ranges. Within the different elastomer types are two different designs, solid center spiders and open-center type spiders. The solid center design is the commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gap. The open-center design allows for the shafts of the driver and driven to be positioned within a short distance. Open-center elastomers offer shaft positioning flexibility but offer lower RPM capacity.
View Details
|
17472 |
100SERIES L-JAW COUPLER INSERT |
In Stock |
13.99 |
/ EA |
C-L100NBR |
|
UNIVL RUBR RAKE TOOTH
Gold Series Universal Rubber Rake Teeth are heat treated for lasting performance. Made of consistent rubber quality assured by injection molding. Hook style head for maximum rubber adhesion. Fits most round bar and parallel bar rakes with 1 5/8" bar.
View Details
|
9109760 |
UNIVL RUBR RAKE TOOTH |
In Stock |
2.49 |
/ EA |
348833 |
|
NEW HOLLAND/ALLEN RAKE TEETH LF
-Heat treated tines for long lasting performance
-Consistent rubber quality assured by injection molding
-Hook style head for maximum rubber adhesion
Dimensions:
-Yoke opening: 1-55/64"
-Bolt hole diameter: 3/8"
-Tine length from mounting hole: 10"
-Tine diameter: 9/32"
View Details
|
9573120 |
NEW HOLLAND/ALLEN RAKE TEETH LF |
In Stock |
4.49 |
/ EA |
300114 |
|
