LX-1172 MINI-PISTOL GRIP GUN
Mini-Pistol Grip Grease Gun with 3 oz. Cartridge
View Details
|
23840 |
LX-1172 MINI-PISTOL GRIP GUN |
In Stock |
23.99 |
/ EA |
LX-1172 |
|
LX-1185 SUCTION GUN
This is a heavy-duty, suction gun with 12 inches oil and UV resistant flex hose. It is excellent for draining and filling transmissions, differentials, clutches, gear cases, etc. It has an 18 ounce fluid capacity with a 10 inches stroke. It needs no priming and has a double-lipped, precision follower to provide a sure seal and eliminates fluid bypass for maximum suction and discharge. The rugged, wide band, non-slip knurling for sure-grip handling. The heavy duty head and end-cap have chrome plated finish for corrosion resistance. It is for use with non-corrosive lubricants only.
View Details
|
23844 |
LX-1185 SUCTION GUN |
In Stock |
23.99 |
/ EA |
LX-1185 |
|
LX-1201 12" GREASE GUN HOSE
This 12 inches aramid fiber reinforced thermoplastic grease hose with 1/8 inches NPT male ends fits most manual grease guns. This hose has a 4,500 PSI working pressure rating and a 12,000 PSI minimum burst rating for safety and dependability. It is working temperature range from -40 degrees Fahrenheit to 212 degrees Fahrenheit. It meets or exceeds SAE 100R7. It is not suitable for power operated grease guns.
View Details
|
23860 |
LX-1201 12" GREASE GUN HOSE |
In Stock |
10.99 |
/ EA |
LX-1201 |
|
LX-1203 18" GREASE GUN HOSE
Length : 18" (45 cm), 1/8" (3.2 mm) High Quality Hose, 4500 PSI (310 Bar) 1/8" NPT Threads
View Details
|
23864 |
LX-1203 18" GREASE GUN HOSE |
In Stock |
14.99 |
/ EA |
LX-1203 |
|
LX-1205 12" GUN HOSE W/SPRING
Length : 12" (30 cm) with Spring Guard, 1/8" (3.2 mm) High Quality Hose, 4500 PSI (310 Bar)
1/8" NPT Threads
View Details
|
23868 |
LX-1205 12" GUN HOSE W/SPRING |
In Stock |
13.99 |
/ EA |
LX-1205 |
|
LX-1207 18" GUN HOSE W/SPRING
Length : 18" (45 cm) with Spring Guard, 1/8" (3.2 mm) High Quality Hose, 4500 PSI (310 Bar)
1/8" NPT Threads
View Details
|
23872 |
LX-1207 18" GUN HOSE W/SPRING |
In Stock |
17.99 |
/ EA |
LX-1207 |
|
LX-1348 MARINE LOWER UNIT PUMP
The marine lower unit flush and fill pump is for adding fluids to marine lower units or remove the LX-1350 coupler included and fill hard to reach fluid inlets, like on small engines, mopeds, motorcycles, lawn tractors, etc. It fits standard quart bottles, comes with standard 3/8 inches 16 adapter and flexible hose for hard-to-reach inlets.
View Details
|
23908 |
LX-1348 MARINE LOWER UNIT PUMP |
In Stock |
16.99 |
/ EA |
LX-1348 |
|
LX-1400 STD GREASE COUPLER
The standard grease coupler is for use with most hand-operated grease guns and equipment, fits all 1/8 inches NPT threads, rated for 4,500 PSI maximum operating pressure, has a built-in spring-loaded ball check valve that prevents leak, pressure loss and lubricant backup. It has four hardened steel jaws for a superior seal, longer life and precision fit. The slight pushing action snaps jaws onto fittings, small outside diameter permits easy contact with recessed fittings, knurled body and easy flats for easy installation and removal, and is zinc plated for maximum protection against corrosion.
View Details
|
23912 |
LX-1400 STD GREASE COUPLER |
In Stock |
7.99 |
/ EA |
LX-1400 |
|
LX-1400-2 STD GREASE CPLR 2PK
The standard grease coupler is for use with most hand-operated grease guns and equipment, fits all 1/8 inches NPT threads, rated for 4,500 PSI maximum operating pressure, has a built-in spring-loaded ball check valve that prevents leak, pressure loss and lubricant backup. It has four hardened steel jaws for a superior seal, longer life and precision fit. The slight pushing action snaps jaws onto fittings, small outside diameter permits easy contact with recessed fittings, knurled body and easy flats for easy installation and removal, and is zinc plated for maximum protection against corrosion.
View Details
|
23916 |
LX-1400-2 STD GREASE CPLR 2PK |
In Stock |
10.99 |
/ EA |
LX-1400-2 |
|
LX-1401 GREASE COUPLER W/HEX
The grease coupler with hex is for use with most hand-operated grease guns and equipment, fits all 1/8 inches NPT threads, has a 6,000 PSI (414 bar) maximum operating pressure, and a hex body for easy installation and removal. The built-in spring-loaded ball check valve prevents leak, pressure loss and lubricant backup, has four hardened steel jaws for a superior seal and longer life. The precision fit enables a slight pushing action to snap jaws onto fittings, and is zinc plated for maximum protection against corrosion.
View Details
|
23920 |
LX-1401 GREASE COUPLER W/HEX |
In Stock |
8.99 |
/ EA |
LX-1401 |
|
LX-1402 H.D. GREASE COUPLER
The heavy-duty, grease coupler is designed for use with all hand-operated and air-powered equipment. The heavy-duty construction withstands higher pressures up to 7,500 PSI maximum operating pressure, fits all 1/8 inches NPT threads, has built-in spring-loaded ball check valve which prevents leak, pressure loss and lubricant backup, has four hardened steel jaws for a superior seal and longer life. The coupler design permits a wide 35 degree leak-proof sealing angle, the knurled body with hex base makes for easy installation and removal, and zinc plated, corrosion-resistant finish.
View Details
|
23924 |
LX-1402 H.D. GREASE COUPLER |
In Stock |
12.99 |
/ EA |
LX-1402 |
|
LX-1404 90 GREASE COUPLER
The 90 degree grease coupler is for use on hand-operated grease guns only. It is designed for hard-to-reach grease fittings on cars, trucks, farm equipment and is ideal for lubrication of front and all-wheel drive vehicles. It has quick connect, a spring loaded sleeve that locks coupler in place for angular applications, and is zinc plated for maximum protection against corrosion. It has a recommended working pressure of 3,000 PSI, a maximum operating pressure of 4,500 PSI, and comes complete with small and large quick-disconnect adapters to fit standard couplers.
View Details
|
23928 |
LX-1404 90 GREASE COUPLER |
In Stock |
23.99 |
/ EA |
LX-1404 |
|
LX-1410 NEEDLE NOSE ADAPTER
The needle nose adapter, 3/4 inches, 1/8 inches NPT is for use on hand-operated grease guns only. It has 1/8 inches NPT with male and female ends, dispenses a fine line of grease through needle nose, can be used with grease gun extension or hose, has a zinc plated, corrosion-resistant finish, and is ideal for use on universal joints and other applications for pinpoint lubrication.
View Details
|
23940 |
LX-1410 NEEDLE NOSE ADAPTER |
In Stock |
10.99 |
/ EA |
LX-1410 |
|
LX-1412 NEEDLE NOSE ADAPTER, 4"
The needle nose adapter, 4 inches is for use on hand-operated grease guns only. It is used for converting standard coupler to other lube adapters, and dispenses a fine line of grease through needle nose. It is perfect for use on those hard-to-reach grease spots on cars, vans, 4 wheel drives, trucks, rv's, farm equipment, and more. It comes complete with both standard and wide-locking sleeves for a quick connection to standard and heavy-duty grease couplers.
View Details
|
23944 |
LX-1412 NEEDLE NOSE ADAPTER, 4" |
In Stock |
16.99 |
/ EA |
LX-1412 |
|
LX-1416 GREASE INJECTOR NEEDLE
The grease injector needle is for use on hand-operated grease guns only. It is ideal for lubricating in very tight places like sealed bearings and universal joints. This 18 gauge x 1-1/2 inches long stainless steel needle is equipped with standard grease fitting and snaps into any grease coupler. It comes with protective plastic cover and is great for hard-to-reach grease points on cars, vans, 4 wheel drives, trucks, rv's, farm and industrial equipment and more.
View Details
|
23948 |
LX-1416 GREASE INJECTOR NEEDLE |
In Stock |
7.99 |
/ EA |
LX-1416 |
|