LX-1330 LIFT-ACTION BARREL PUMP
The lift-action, steel barrel pump with removable steel spout is a zinc-plated steel barrel pump for transferring non-corrosive fluids of light to medium viscosity like, motor oils, transmission fluid, heating oils, machine oil, automotive additives, cleaning solutions, lacquer thinner, solvents, diesel fuel, kerosene, etc. It fits 55 gallon drums (210 liter) with standard 2 inches bung opening is self priming, has a die-cast head with curved metal spout, a precision buna-n seal that eliminates by-pass and a floating steel check valve drains liquid when not in use. The pump has a steel piston for durability, comes with an adjustable 2 inches bung bushing, a zinc plated, corrosion-resistant suction tube, and a discharge spout that can be rotated 180 degree and can be removed to expose a garden hose threaded outlet. The discharge capacity is 22 fluid ounce per stroke with a 1-1/2 inches inlet port and a 3/4 inches outlet port.
View Details
|
23896 |
LX-1330 LIFT-ACTION BARREL PUMP |
In Stock |
47.99 |
/ EA |
LX-1330 |
|
LX-1344 HAND TRANSFER PUMP
The hand transfer pump is ideal for transferring fluids from one container to the other and for draining oils and other fluids. The easy pumping action allows smooth transfer of non-corrosive fluids, such as, motor and hydraulic oil, transmission fluid, brake fluid, cleaning fluids, agricultural and industrial chemicals. It is ideal for automotive, commercial, industrial and agricultural applications and is self priming and has a heavy gauge steel pump body (18 gram) wall thickness with durable electrostatic, corrosion-resistant finish, durable, oil resistant o-rings, a double check valve, and a 8 feet soft vinyl hose for suction and discharge of fluids. The discharge capacity is one gallon per 8 strokes.
View Details
|
23904 |
LX-1344 HAND TRANSFER PUMP |
Discontinued |
20.04 |
/ EA |
LX-1344 |
|
LX-1348 MARINE LOWER UNIT PUMP
The marine lower unit flush and fill pump is for adding fluids to marine lower units or remove the LX-1350 coupler included and fill hard to reach fluid inlets, like on small engines, mopeds, motorcycles, lawn tractors, etc. It fits standard quart bottles, comes with standard 3/8 inches 16 adapter and flexible hose for hard-to-reach inlets.
View Details
|
23908 |
LX-1348 MARINE LOWER UNIT PUMP |
In Stock |
16.99 |
/ EA |
LX-1348 |
|
LX-1400 STD GREASE COUPLER
The standard grease coupler is for use with most hand-operated grease guns and equipment, fits all 1/8 inches NPT threads, rated for 4,500 PSI maximum operating pressure, has a built-in spring-loaded ball check valve that prevents leak, pressure loss and lubricant backup. It has four hardened steel jaws for a superior seal, longer life and precision fit. The slight pushing action snaps jaws onto fittings, small outside diameter permits easy contact with recessed fittings, knurled body and easy flats for easy installation and removal, and is zinc plated for maximum protection against corrosion.
View Details
|
23912 |
LX-1400 STD GREASE COUPLER |
In Stock |
7.99 |
/ EA |
LX-1400 |
|
LX-1400-2 STD GREASE CPLR 2PK
The standard grease coupler is for use with most hand-operated grease guns and equipment, fits all 1/8 inches NPT threads, rated for 4,500 PSI maximum operating pressure, has a built-in spring-loaded ball check valve that prevents leak, pressure loss and lubricant backup. It has four hardened steel jaws for a superior seal, longer life and precision fit. The slight pushing action snaps jaws onto fittings, small outside diameter permits easy contact with recessed fittings, knurled body and easy flats for easy installation and removal, and is zinc plated for maximum protection against corrosion.
View Details
|
23916 |
LX-1400-2 STD GREASE CPLR 2PK |
In Stock |
10.99 |
/ EA |
LX-1400-2 |
|
LX-1401 GREASE COUPLER W/HEX
The grease coupler with hex is for use with most hand-operated grease guns and equipment, fits all 1/8 inches NPT threads, has a 6,000 PSI (414 bar) maximum operating pressure, and a hex body for easy installation and removal. The built-in spring-loaded ball check valve prevents leak, pressure loss and lubricant backup, has four hardened steel jaws for a superior seal and longer life. The precision fit enables a slight pushing action to snap jaws onto fittings, and is zinc plated for maximum protection against corrosion.
View Details
|
23920 |
LX-1401 GREASE COUPLER W/HEX |
In Stock |
8.99 |
/ EA |
LX-1401 |
|
LX-1402 H.D. GREASE COUPLER
The heavy-duty, grease coupler is designed for use with all hand-operated and air-powered equipment. The heavy-duty construction withstands higher pressures up to 7,500 PSI maximum operating pressure, fits all 1/8 inches NPT threads, has built-in spring-loaded ball check valve which prevents leak, pressure loss and lubricant backup, has four hardened steel jaws for a superior seal and longer life. The coupler design permits a wide 35 degree leak-proof sealing angle, the knurled body with hex base makes for easy installation and removal, and zinc plated, corrosion-resistant finish.
View Details
|
23924 |
LX-1402 H.D. GREASE COUPLER |
In Stock |
12.99 |
/ EA |
LX-1402 |
|
LX-1404 90 GREASE COUPLER
The 90 degree grease coupler is for use on hand-operated grease guns only. It is designed for hard-to-reach grease fittings on cars, trucks, farm equipment and is ideal for lubrication of front and all-wheel drive vehicles. It has quick connect, a spring loaded sleeve that locks coupler in place for angular applications, and is zinc plated for maximum protection against corrosion. It has a recommended working pressure of 3,000 PSI, a maximum operating pressure of 4,500 PSI, and comes complete with small and large quick-disconnect adapters to fit standard couplers.
View Details
|
23928 |
LX-1404 90 GREASE COUPLER |
In Stock |
23.99 |
/ EA |
LX-1404 |
|
LX-1406 360 SWIVEL COUPLER
The 360 degree swivel fitting is for use on hand-operated grease guns only and swivels in a full 360 degree circle and locks in place. This fitting has a 45 degree angle that gives easy access to most grease fittings, a 1/8 inches NPT, female inlet, is zinc plated for maximum protection against corrosion, and comes with Lumax, LX-1400 standard grease coupler. The recommended working pressure is 3,000 PSI and the maximum operating pressure is 4,500 PSI.
View Details
|
23932 |
LX-1406 360 SWIVEL COUPLER |
In Stock |
28.99 |
/ EA |
LX-1406 |
|
LX-1410 NEEDLE NOSE ADAPTER
The needle nose adapter, 3/4 inches, 1/8 inches NPT is for use on hand-operated grease guns only. It has 1/8 inches NPT with male and female ends, dispenses a fine line of grease through needle nose, can be used with grease gun extension or hose, has a zinc plated, corrosion-resistant finish, and is ideal for use on universal joints and other applications for pinpoint lubrication.
View Details
|
23940 |
LX-1410 NEEDLE NOSE ADAPTER |
In Stock |
10.99 |
/ EA |
LX-1410 |
|
LX-1412 NEEDLE NOSE ADAPTER, 4"
The needle nose adapter, 4 inches is for use on hand-operated grease guns only. It is used for converting standard coupler to other lube adapters, and dispenses a fine line of grease through needle nose. It is perfect for use on those hard-to-reach grease spots on cars, vans, 4 wheel drives, trucks, rv's, farm equipment, and more. It comes complete with both standard and wide-locking sleeves for a quick connection to standard and heavy-duty grease couplers.
View Details
|
23944 |
LX-1412 NEEDLE NOSE ADAPTER, 4" |
In Stock |
16.99 |
/ EA |
LX-1412 |
|
LX-1416 GREASE INJECTOR NEEDLE
The grease injector needle is for use on hand-operated grease guns only. It is ideal for lubricating in very tight places like sealed bearings and universal joints. This 18 gauge x 1-1/2 inches long stainless steel needle is equipped with standard grease fitting and snaps into any grease coupler. It comes with protective plastic cover and is great for hard-to-reach grease points on cars, vans, 4 wheel drives, trucks, rv's, farm and industrial equipment and more.
View Details
|
23948 |
LX-1416 GREASE INJECTOR NEEDLE |
In Stock |
7.99 |
/ EA |
LX-1416 |
|
LX-1418 SEAL OFF ADAPTER W/RUBBR
The seal-off adapter is for use on hand-operated grease guns only. It has 1/8 inches NPT female threads and can be used with grease gun extension or hose. It has an oil and grease resistant rubber tip, a zinc plated, corrosion-resistant finish, and is ideal for lubricating grease plugs, steering linkage, front suspension and universal joints.
View Details
|
23952 |
LX-1418 SEAL OFF ADAPTER W/RUBBR |
In Stock |
9.99 |
/ EA |
LX-1418 |
|
LX-1424 GREASE GUN EXTENSION 6"
The grease gun extension pipe is a 6 inches extension for hand operated grease guns. It has a 30 degree angle, 1/8 inches NPT male threads on both ends, and has a zinc plated, corrosion-resistant, finish.
View Details
|
23964 |
LX-1424 GREASE GUN EXTENSION 6" |
In Stock |
6.99 |
/ EA |
LX-1424 |
|
LX-1426 4-WAY GREASE FITING TOOL
The grease fitting installation and removal tools is an all-in-one tool to install new straight and angle-type fittings, rethread holes and remove straight, angle-type or old pin type broken fittings. This small, 4-way grease fitting tool is for tapping 1/4 inches-28 threads and removal of 5/16 inches and 3/8 inches straight or angle fittings.
View Details
|
23968 |
LX-1426 4-WAY GREASE FITING TOOL |
In Stock |
24.99 |
/ EA |
LX-1426 |
|
