LX-1708 GALV FUNNEL W/SCREEN 8QT
The galvanized steel funnel is of heavy-duty construction for rugged use, has a rolled edge, high, splash-proof rim, a grooved spout for air-venting, a fluted bottom to prevent swirling, a bright zinc galvanized corrosion-resistant finish, and comes complete with removable stainless steel strainer. It has 8 quart / 16 pint (7.6 liter) capacity.
View Details
|
24080 |
LX-1708 GALV FUNNEL W/SCREEN 8QT |
In Stock |
26.99 |
/ EA |
LX-1708 |
|
LX-1710 GALV DRAIN PAN 6GAL
The galvanized drain pan is of heavy-duty construction for rugged use and durability, is made of bright zinc galvanized steel for a corrosion-resistant finish, measures 19 inches (480 millimeter) in diameter by 6 inches (150 millimeter) deep, a ribbed bottom and a rolled smooth edge for extra strength, and an anti-splash baffle which helps prevent spills while pouring. The two handles make it easy to carry when full. It has 6 gallon (22.8 liter) capacity.
View Details
|
24084 |
LX-1710 GALV DRAIN PAN 6GAL |
In Stock |
52.99 |
/ EA |
LX-1710 |
|
LX-1804 SWIVEL HANDLE FILTER WRH
The deluxe, swivel filter wrench has heavy-duty, steel construction with comfortable vinyl grip. It features a swivel handle to easily clear obstructions, is ideal for hard-to-reach filters, has a wide band which provides a strong grip and prevents crushed filters. It fits most standard car and truck filter from 2-7/8 inches to 3-1/2 inches (73 to 89 millimeter) in diameter.
View Details
|
24092 |
LX-1804 SWIVEL HANDLE FILTER WRH |
In Stock |
12.99 |
/ EA |
LX-1804 |
|
LX-3007-10 1/4"-28 GREASE ZIRK
This is a 1/4 inches-28 taper thread (SAE-LT), straight, 0.54 inches grease fitting. It is used on most auto vehicles and on industrial equipment. SAE-LT threads conforms to society of automotive engineers lubrication thread specification. The ball check prevents dust and dirt contamination. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal and construction equipment needs.
View Details
|
24112 |
LX-3007-10 1/4"-28 GREASE ZIRK |
In Stock |
5.99 |
/ EA |
LX-3007-10 |
|
LX-3013-10 1/4"-28 GREASE ZIRK
This is a 1/4 inches-28 taper thread (SAE-LT), 45 degree, 0.81 inches grease fitting. It is used on most auto vehicles and on industrial equipment. SAE-LT threads conforms to society of automotive engineers lubrication thread specification. The ball check prevents dust and dirt contamination. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal and construction equipment needs.
View Details
|
24124 |
LX-3013-10 1/4"-28 GREASE ZIRK |
In Stock |
14.99 |
/ EA |
LX-3013-10 |
|
LX-3019-10 1/4"-28 GREASE ZIRK
This is a 1/4 inches-28 taper thread (SAE-LT), 90 degree, 0.75 inches grease fitting. It is used on most auto vehicles and on industrial equipment. SAE-LT threads conforms to society of automotive engineers lubrication thread specification. The ball check prevents dust and dirt contamination. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal and construction equipment needs.
View Details
|
24128 |
LX-3019-10 1/4"-28 GREASE ZIRK |
In Stock |
10.99 |
/ EA |
LX-3019-10 |
|
LX-3101-10 1/8"PTF GREASE ZIRK
This is a 1/8 inches P.T.F. special extra short, straight, 0.63 inches grease fitting. It is constructed for additional strength, these fittings are ideally suited for use on heavy industrial, agricultural and construction equipment. The ball check prevents dust and dirt contamination. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
View Details
|
24140 |
LX-3101-10 1/8"PTF GREASE ZIRK |
In Stock |
6.99 |
/ EA |
LX-3101-10 |
|
LX-3113-10 1/8"PTF GREASE ZIRK
This is a 1/8 inches P.T.F. special short, 45?, 0.89 inches grease fitting. It is constructed for additional strength, these fittings are ideally suited for use on heavy industrial, agricultural and construction equipment. The ball check prevents dust and dirt contamination. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
View Details
|
24144 |
LX-3113-10 1/8"PTF GREASE ZIRK |
In Stock |
10.99 |
/ EA |
LX-3113-10 |
|
LX-3119-10 1/8"PTF GREASE ZIRK
This is a 1/8 inches P.T.F. special short, 90?, 0.85 inches grease fitting. It is constructed for additional strength, these fittings are ideally suited for use on heavy industrial, agricultural and construction equipment. The ball check prevents dust and dirt contamination. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
View Details
|
24148 |
LX-3119-10 1/8"PTF GREASE ZIRK |
In Stock |
10.99 |
/ EA |
LX-3119-10 |
|
LX-3505-10 3/16" GREASE ZIRK
These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
View Details
|
24152 |
LX-3505-10 3/16" GREASE ZIRK |
In Stock |
7.99 |
/ EA |
LX-3505-10 |
|
LX-3511-10 5/16" GREASE ZIRK
These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
View Details
|
24156 |
LX-3511-10 5/16" GREASE ZIRK |
In Stock |
8.99 |
/ EA |
LX-3511-10 |
|
LX-4805 8 PC ASTMT (SAE) ZIRKS
This is a 8 piece assortment, (SAE), 1/4 inches-28 taper and 1/8 inches NPT grease fitting. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
View Details
|
24160 |
LX-4805 8 PC ASTMT (SAE) ZIRKS |
In Stock |
7.99 |
/ EA |
LX-4805 |
|
LX-4809 8 PC ASTMT (METRIC) ZIRK
This is a 8 piece assortment, metric, 6 millimeter x 1 and 8 millimeter x 1 grease fitting. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 PSI and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
View Details
|
24164 |
LX-4809 8 PC ASTMT (METRIC) ZIRK |
In Stock |
7.99 |
/ EA |
LX-4809 |
|
LX-1175 12V GREASE GUN 1 BATTERY
LUMAX 12V GREASE GUN
Balanced and Ergonomic
Lightweight and Durable Construction
Comfortable, Non-Slip Grip
Chrome Plated Barrel for Maximum Protection against Corrosion
Ideal for hard-to-reach Grease Fittings
Maximum Operating Pressure: 7,000 PSI (483 bar)
High Flow Rate: 3.5 oz. / min. (95 g / min.)
Built-in Pressure Relief Valve
Powerful 1500mAh Ni-Cd Battery Pack
Fully Charged Battery Delivers up to 5 Cartridges of Grease
30" Ultra-flex Hose with Spring Guards and Non-Drip Cap
Hose and Coupler Holder
90~132V 1-hour Fast Charger
View Details
|
26752 |
LX-1175 12V GREASE GUN 1 BATTERY |
In Stock |
152.99 |
/ EA |
LX-1175 |
|
LX-1403 QUICK RELEAS GREAS COUPL
LUMAX QUICK RELEASE GREASE COUPLER
Integrated Non-Return Valve enables unit to be Disconnected Easily at pressures up to 15,000 PSI (1,034 Bar).
Burst Pressure: 22,000 PSI
Integrated 1/8" NPT Connection. Suitable for Use on most Hand, Battery Powered or Air Operated Grease Guns & Bulk Grease Pumps
Ergonomic Thumb Lever Design
Compatible with all Sizes and forms of Mounts. Fits all SAE and Metric Grease Fittings
Compact: 2.9" Length x 1.2" Height. Ideal for Use in Small, Tight Spaces.
View Details
|
39876 |
LX-1403 QUICK RELEAS GREAS COUPL |
In Stock |
32.99 |
/ EA |
LX-1403 |
|
